Imam, Syed A ORCID: https://orcid.org/0000-0003-1198-7448, Hughes, Angus C, Carré, Matt ORCID: https://orcid.org/0000-0003-3622-990X, Driscoll, Heather, Winwood, Keith ORCID: https://orcid.org/0000-0002-8696-9976, Venkatraman, Prabhuraj ORCID: https://orcid.org/0000-0003-4290-4510 and Allen, Tom (2024) A finite element model for predicting impact-induced damage to a skin simulant. Scientific Reports, 14 (1). 12810. ISSN 2045-2322
|
Published Version
Available under License Creative Commons Attribution. Download (4MB) | Preview |
Abstract
A finite element model was developed for assessing the efficacy of rugby body padding in reducing the risk of sustaining cuts and abrasions. The model was developed to predict the onset of damage to a soft tissue simulant from concentrated impact loading (i.e., stud impact) and compared against a corresponding experiment. The damage modelling techniques involved defining an element deletion criterion, whereby those on the surface of the surrogate were deleted if their maximum principal stress reached a predefined value. Candidate maximum principal stress values for element deletion criteria were identified independently from puncture test simulations on the soft tissue simulant. Experimental impacts with a stud were carried out at three energies (2, 4 and 6 J), at three angular orientations (0°, 15° and 30°) and compared to corresponding simulations. Suitable maximum principal stress values for element deletion criteria settings were first identified for the 4 J impact, selecting the candidates that best matched the experimental results. The same element deletion settings were then applied in simulations at 2 and 6 J and the validity of the model was further assessed (difference < 15% for the force at tear and < 30% for time to tear). The damage modelling techniques presented here could be applied to other skin simulants to assess the onset of skin injuries and the ability of padding to prevent them.
Impact and Reach
Statistics
Additional statistics for this dataset are available via IRStats2.