Active flow control over a backward-facing step using plasma actuation

Ruisi, R, Zare-Behtash, H, Kontis, K and Erfani, R (2016) Active flow control over a backward-facing step using plasma actuation. Acta Astronautica, 126. pp. 354-363. ISSN 0094-5765

Preview

Download (3MB) | Preview

Abstract

© 2016 IAA.Due to the more stringent aviation regulations on fuel consumption and noise reduction, the interest for smaller and mechanically less complex devices for flow separation control has increased. Plasma actuators are currently among the most studied typology of devices for active flow control purposes due to their small size and lightweight. In this study, a single dielectric barrier discharge (SDBD) actuator is used on a backward-facing step to assess its effects on the separated turbulent shear layer and its reattachment location. A range of actuating modulation frequencies, related to the natural frequencies of shear layer instability (flapping) and vortex shedding instability, are examined. The particle image velocimetry technique is used to analyse the flow over the step and the reattachment location. The bulk-flow experiments show negligible effects both on the shear layer and on the reattachment location for every frequency considered, and the actuator is not able to induce a sufficient velocity increase at the step separation point.